Terex Site Dumpers 3 Tonne


Skip Fabrications

All skips are fabricated with thick steel side walls and heavy duty steel front and basse plates.  Additionally, the reinforced box section design is structured around the edges of the skip offering high levels of protection from excavator bucket collision.

Centre Articulation

All dumpers utilise single heavy duty centre pivot pin and a single steering ram connecting the chassis sections. This design provides large articulation and oscillation angles for tighter turning and sustained ground contact.

Articulation Lock

An articulation lock is supplied as standard for locking the two chassis in the forward position for transport and maintenance.

Chassis Fabrications

Throughout the range heavy duty fabrications are specified to ensure all Terex dumpers can withstand the most difficult conditions and enthusiastic operators.

Folding ROPS

Folding Roll Over Protection Structure or ROPS are fitted as standard to all site dumpers, whilst fixed versions are available on certain models.

Road Lights

Front and rear road lights are available as an option and are fitted with extra heavy duty guards to protect against dirt and damage.

Ground Clearance

All Terex site dumpers are designed to work on all types of terrain, high ground clearance across the range and permanent 4WD means they get where other vehicles can’t.

Instrumentation and Controls

Keeping instrumentation easy to read, intuitive to operate and simple to service is a fundamental part of the Rental Tough offering from Terex.



Terex® 3 & 3.5 tonne site dumpers are designed to be easy to operate and maintain with unrivalled strength and reliability, providing increased uptime at a lower cost.  With class leading skip capacities, strong chassis fabrications and user friendly controls, these models are in high demand across the widest range of applications:

  • Class leading skip capacities as measured in litres (1,880 heaped, 1,520 struck, 1,000 water)
  • Class leading torque with 147Nm to power through challenging terrain
  • Choose either a manual gearbox or hydrostatic motor with permanent 4WD
  • Choice of forward or swivel tip discharge
  • Large volume fuel tank (37 litres) for less frequent fuel stops
  • Powered by  a 32.4kW (43.5hp) Kubota engine